50 | KIV-BT900/ KIV-700Bluetooth SetupBluetooth SettingYou can select following Bluetooth Setting items.1 Enter Bluetooth modeKIV-BT900: Press the [ ] button.KIV-700: Press the [PLAY MODE] button for atleast 1 second.2 Turn the [Volume] knob and press it when thedesired item is displayed.Select “BT Settings”.3 Select the setting item to adjustTurn the [Volume] knob and press it when thedesired item is displayed.Display Overview“SMS Inbox” Display the received short message.Refer to (page 56).“BT Settings”“Phone Selection” Select a cell-phone or Bluetooth audio playerconnection.Refer to Wish to Connect> (page 52).“Audio Selection”* 1“SMS Download” Download a short message.Refer to (page 56).“Voice Tag” Registers voice for voice recognition and voiceto select the Phone number category in Phonebook.- Adding a Voice Dialing Command (page 54)- Setting a Voice Command for Category (page55)“Detailed Setup” Move to detailed item.“DeviceRegistration”Register a Bluetooth device (pairing).Refer to (page 51).“Special DeviceSelect”“Device Delete” Cancel registration of the Bluetooth device.Refer to Device> (page 53).“PIN Code Edit” Specify the PIN code required when registeringthis unit using the Bluetooth device.Refer to (page 52).“Auto Answer” Answer a call automatically after lapse of thepreset time interval for automatic answer.“OFF”/ “0s” – “8s” – “99s”“Bluetooth HF”/“Bluetooth HF/Audio”*1You can specify output speakers for hands-freevoice communication and Bluetooth audiosound.“Front”: Outputs voice from the front speakers.“All”: Outputs voice from the front and rearspeakers.“Call Beep” You can output a beep from the speaker whena call comes in.“ON”: Beep is heard.“OFF”: Beep is canceled.“BT F/W Update” Display the version of the firmware of this unit.“Mic Gain”* 2 Adjust the sensitivity of the microphone for atelephone call. Adjust the voice of caller. Settingto “+” increases the voice volume.“–3” – “0” – “+3”“NoiseReduction”* 2Reduce the noises generated by surroundingenvironment without changing the microphonevolume. Adjust the voice of caller when it isnot clear. Setting to “+” increases the noisereduction.“–3” – “0” – “+3”“Echo CancelLevel”* 2Adjust the level of echo cancellation. Setting to“+” increases the echo cancel reduction.“–2” – “0” – “+2”( : Factory setting)*1 Function of KIV-700 with KCA-BT300/BT200 (OptionalAccessory)* 2 Function of KIV-BT900/ KIV-700 with KCA-BT300(Optional Accessory)4 Make a settingTurn the [Volume] knob to select a settingvalue, and then press the [Volume] knob.5 Exit BT Setting modePress the [MENU] button for at least 1 second.Remarks• “Auto Answer” (Setting the Time Interval for AutomaticAnswer)This function automatically answers (responds to) a callafter lapse of the preset time interval for automatic answer.“OFF” : Does not answer the phone call automatically.“0” : Automatically answers the phone call at once.“1s” – “99s” : Automatically answers the phone call afterlapse of 1 – 99 seconds.⁄• If the time set in the cell-phone is shorter than that set inthe unit, the former will be used.• This function does not work for call waiting.• “BT F/W Update” (Displaying the Firmware Version)Display the version of the firmware of this unit.For how to update the firmware, access our web site.http://www.kenwood.com/cs/ce/bt/Function of KIV-BT900KIV-700 with KCA-BT300/BT200 (Optional Accessory)SRC MENU Volume
