English | 29• The text scrolled is shown below.- CD text- MD title- Radio text- Text for GSM hands free source (message, etc.)Built-in Auxiliary input SettingSet the Built-in Auxiliary Input function.Display Setting"AUX OFF" When selecting the source there’s no Auxiliary Input."AUX ON" When selecting the source there’s Auxiliary Input.Power OFF TimerSetting the timer to turn this unit’s power OFFautomatically when Standby mode continues.Using this setting can save the vehicle’s batterypower.Display Setting"OFF – – – –" Power OFF Timer function is OFF."OFF 20min"(Original setting)Turns the power OFF after 20 minutes."OFF 40min" Turns the power OFF after 40 minutes."OFF 60min" Turns the power OFF after 60 minutes.• This setting is done after setting 'Security Code' (page24).In Standby modeMD Group SettingSwitching ON and OFF the MD Group function.Display Setting"MD Group ON" Group management function is ON."MD Group OFF" Group management function is OFF.• The MD group functions of Group Search, GroupRepeat Play, Group Random Play and Group Selectare available when an MD with group registration isplayed if 'MD Group Setting' is ON.Because any track without group registration is notplayed, register it into any group or turn 'MD GroupSetting' OFF.For MD Group refer to 'Notes on playing MD Group'(page 6).When LX AMP unit connectingAMP ControlYou can control the LX AMP connected to theunit.1 Select AMP Control modePress the [FM] or [AM] button.Select the "AMP Control" display.2 Enter AMP Control modePress the [4] or [¢] button for at least 1second.3 Select the AMP Control item for adjustmentPress the [FM] or [AM] button.• For the details of the AMP Control item, see theInstruction manual attached to the LX AMP.4 Adjust the AMP Control itemPress the [4] or [¢] button.5 Exit AMP Control modePress the [MENU] button.• You cannot use the LX AMP operation during standbymode.