Kenwood KMM-BT205 Instruction Manual

Also see for KMM-BT205: Instruction manual

4 ENGLISHGETTING STARTEDSelect the display language and cancel the demonstrationWhen you turn on the power for the first time (or [FACTORY RESET] is set to[YES], see page 5), the display shows: “SEL LANGUAGE” “PRESS”“VOLUME KNOB”1 Turn the volume knob to select [EN] (English), [RU] (Russian),[SP] (Spanish) or [FR] (French), then press the knob.[EN] is selected for the initial setup.Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.2 Press the volume knob again.[YES] is selected for the initial setup.3 Press the volume knob again.“DEMO OFF” appears.Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or“3-WAY X ’ OVER”• To change the crossover type, see “Change the crossover type” onpage 5.Set the clock and date1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.To adjust the clock3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.124 Turn the volume knob to make the settings, then press the knob.Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.6 Turn the volume knob to select [12H] or [24H], then press the knob.To set the date7 Turn the volume knob to select [DATE FORMAT], then press the knob.8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then pressthe knob.9 Turn the volume knob to select [DATE SET], then press the knob.10 Turn the volume knob to make the settings, then press the knob.Day Month Year or Month Day Year11 Press and hold to exit.To return to the previous setting item, press .Set the initial settings1 Press B SRC repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select an item (see the following table), thenpress the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .Default: [XX][AUDIO CONTROL][SWITCH PREOUT] (For : Applicable only if [X’OVER] is set to [2WAY].)(Page 5)[REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer areconnected to the line out terminals on the rear (through an externalamplifier). (Page 32)3