6 ENGLISHRADIO• “ST” lights up when receiving an FM stereo broadcast with sufficient signalstrength.• The unit switches to FM alarm automatically when receiving an alarmsignal from FM broadcast.Search for a station1 Press B SRC repeatedly to select RADIO.2 Press BAND repeatedly to select FM1/FM2/FM3/MW/LW.3 Press S / T to search for a station.You can store up to 18 stations for FM and 6 stations for MW/LW.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6).Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the right column), thenpress the knob.3 Repeat step 2 until the desired item is selected/activated or follow theinstructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .Default: [XX][TUNER SETTING][SEEK MODE] Selects the searching method for S / T buttons when pressed.[AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a presetstation. ; [MANUAL]: Manually search for a station.[LOCAL SEEK] [ON]: Searches only stations with good reception. ; [OFF]: Cancels.• Settings made are applicable only to the selected source/station. Onceyou change the source/station, you need to make the settings again.[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;[NO]: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)[MONO SET] [ON]: Improves the FM reception, but the stereo effect will be lost. ;[OFF]: Cancels.[NEWS SET] [ON]: The unit will temporarily switch to News Programme if available. ;[OFF]: Cancels.[REGIONAL] [ON]: Switches to another station only in the specific region using the “AF”control. ; [OFF]: Cancels.[AF SET] [ON]: Automatically searches for another station broadcasting the sameprogram in the same Radio Data System network with better receptionwhen the current reception is poor. ; [OFF]: Cancels.[TI] [ON]: Allows the unit to temporarily switch to Traffic Information ifavailable (“TI” lights up) while listening to all sources except in MW/LW. ;[OFF]: Cancels.[PTY SEARCH] 1 Turn the volume knob to select the available Program Type (page 7),then press the knob.2 Turn the volume knob to select the PTY language ([ENGLISH]/[FRENCH]/[GERMAN]), then press the knob.3 Press S / T to start searching.