Kenwood KMM-BT308U Instruction Manual

12Bluetooth test modeYou can check the connectivity of the supported profile between theBluetooth device and the unit.• Make sure there is no Bluetooth device connected.1 Press and hold .“PLEASE PAIR YOUR PHONE” appears.2 Search and select this unit model name (KMM-BT3**U/ KMM-BT3**/KMR-M3**BT) on the Bluetooth device.3 Operate the Bluetooth device to confirm pairing.“TESTING” flashes on the display.The connectivity result (OK or NG) appears after the test.PAIRING: Pairing statusHF CNT: Hands-Free Profile (HFP) compatibilityAUD CNT: Advanced Audio Distribution Profile (A2DP) compatibilityPB DL: Phonebook Access profile (PBAP) compatibility• To cancel check mode, press and hold B SRC to turn off the unit.Bluetooth mobile phoneTo Do thisReceive a call Press or the volume knob or one of thenumber buttons (1 to 6) (or press onRC-406).• All the button illumination flash when thereis an incoming call.• When [AUTO ANSWER] is set to the selectedtime, the unit answers incoming callautomatically. ( 14)Reject an incomingcallPress B SRC (or press on RC-406).End a call Press or B SRC (or press on RC-406).Pair a Bluetooth deviceWhen connecting a Bluetooth device to the unit for the first time,perform pairing between the unit and the device. Once the pairing iscompleted, the Bluetooth device will remain registered in the unit even ifyou reset the unit.• Up to five devices can be registered (paired) in total.• A maximum of two Bluetooth phones and one Bluetooth audio devicecan be connected at any time.• This unit supports Secure Simple Pairing (SSP).• Some Bluetooth devices may not automatically connect to the unitafter pairing. Connect the device to the unit manually. Refer to theinstruction manual of the Bluetooth device for more information.1 Press B SRC to turn on the unit.2 Search and select this unit model name (KMM-BT3**U/ KMM-BT3**/KMR-M3**BT) on the Bluetooth device.“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUMEKNOB” scrolls on the display.3 Press the volume knob to start pairing.“PAIRING OK” appears when pairing is completed and “BT” will lightup when the Bluetooth connection is established.• For some Bluetooth devices, you may need to enter the PersonalIdentification Number (PIN) code immediately after searching.• Pairing request (via Bluetooth) is automatically activated if an iPhone/iPod touch is connected through the USB input terminal. (Applicableonly if [AUTO PAIRING] is set to [ON].) ( 15)Press the volume knob to pair once you have confirm the device name.BLUETOOTH®