Kenwood KMM-BT308U Instruction Manual

4GETTING STARTEDSet the initial settings1 Press B SRC to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to make a selection (see the following table), then pressthe knob.4 Press and hold to exit.To return to the previous setting item or hierarchy, press .Default: XXAUDIO CONTROLSWITCH PREOUT REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected tothe line out terminals on the rear (through an external amplifier).SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.TUNER SETTINGPRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset button, regardlessof the selected band.SYSTEMKEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.SOURCE SELECTPANDORA SRC* ON: Enables PANDORA in source selection. ; OFF: Disables. ( 8)IHEART SRC* ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 9)BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 8)F/W UPDATEUPDATE SYSTEM/ UPDATE BTF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/* For KMM-BT308U / KMR-M308BT .3Cancel the demonstrationWhen you turn on the power (or after you reset the unit), thedisplay shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”1 Press the volume knob.[YES] is selected for the initial setup.2 Press the volume knob again.“DEMO OFF” appears.For KMR-M308BT , [DEMO OFF] is selected initially.Set the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.4 Turn the volume knob to make the settings, then press the knob.Day Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press theknob.6 Turn the volume knob to select [12H] or [24H], then press the knob.7 Press and hold to exit.To return to the previous setting item or hierarchy, press .While in clock display screen...Press and hold DISP SCRL to enter clock adjustment modedirectly.Then, perform step 4 above to set the clock.12