Kenwood KMM-BT312U Instruction Manual

Also see for KMM~BT312U: Instruction manual

Contents

16BLUETOOTH®Make a callYou can make a call from the call history, phonebook, or dialing the number. Call by voice is alsopossible if your mobile phone has the feature.1 Press to enter Bluetooth mode.2 Turn the volume knob to make a selection (see the following table), then press the knob.3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated onthe selected item.4 Press and hold to exit.To return to the previous setting item, press .CALL HISTORY 1 Press the volume knob to select a name or a phone number.• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to indicate the previouscall status.• Press to change the display category (NUMBER or NAME).• “NO DATA” appears if there is no recorded call history.2 Press the volume knob to call.PHONE BOOK 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts).The first menu (ABCDEFGHIJK) appears.• To go to the other menu (LMNOPQRSTUV or WXYZ1*), press J / K.• To select the desired first letter, turn the volume knob or press S / T, then press the knob.Select “1” to search with numbers and select “*” to search with symbols.2 Turn the volume knob to select a name, then press the knob.3 Turn the volume knob to select a phone number, then press the knob to call.• If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unitwhen pairing.• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL• This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)Make the settings for receiving acall1 Press to enter Bluetooth mode.2 Turn the volume knob to make aselection (see the following table), thenpress the knob.3 Repeat step 2 until the desired item isselected or activated.4 Press and hold to exit.To return to the previous setting item, press.Default: XXSETTINGSAUTO ANSWER 1 — 30: The unit answers incomingcall automatically in the selectedtime (in seconds). ; OFF: Cancels.BATT/SIGNAL AUTO: Shows the strength of thebattery and signal when the unitdetects a Bluetooth device and theBluetooth device is connected. ;OFF: Cancels. Clock time is shown.