Kenwood KMM-BT312U Instruction Manual

Also see for KMM~BT312U: Instruction manual

Contents

22MORE INFORMATIONAbout Pandora• Pandora is available only in the U.S., Australia and New Zealand.• Because Pandora is a third-party service, the specifications aresubject to change without prior notice. Accordingly, compatibilitymay be impaired, or some or all of the services may becomeunavailable.• Some functions of Pandora cannot be operated from this unit.• For issues using the application, please contact Pandora at pandora-support@pandora.com.About iHeartRadio• iHeartRadio® is a third-party service, therefore the specifications aresubject to change without prior notice. Accordingly, compatibilitymay be impaired or some or all of the services may becomeunavailable.• Some iHeartRadio® functionality cannot be operated from this unit.About Bluetooth• Depending on the Bluetooth version of the device, some Bluetoothdevices may not be able to connect to this unit.• This unit may not work with some Bluetooth devices.• Signal conditions vary, depending on the surroundings.• For more information about Bluetooth, visit the following website:www.kenwood.com/cs/ce/TROUBLESHOOTINGSymptom RemedyGeneralSound cannot be heard. • Adjust the volume to the optimum level.• Check the cords and connections.“MISWIRING CHECK WIRING THEN PWRON” appears.Turn the power off, then check to be sure the terminals of thespeaker wires are insulated properly. Turn the power on again.“PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center.• Sound cannot be heard.• The unit does not turn on.• Information shown on the display isincorrect.Clean the connectors. ( 2)The unit does not work at all. Reset the unit. ( 3)(For )“SET ERROR” / “DEL ERROR”Setting/deleting the remote control ID is unsuccessful. Turn thepower off, then turn on the power and perform the operationagain. ( 5)Radio • Radio reception is poor.• Static noise while listening to theradio.• Connect the antenna firmly.• Pull the antenna out all the way.USB / iPod“READING” keeps flashing. Do not use too many hierarchical levels or folders.Elapsed playing time is not correct. This is caused by how the files are recorded.Correct characters are not displayed(e.g. album name).This unit can only display uppercase letters, numbers, and a limitednumber of symbols.“NA FILE” Make sure the media contains supported audio files. ( 21)“READ ERROR” Copy the files and folders onto the USB device again. If this does notsolve the problem, reset the USB device or use another USB device.“NO DEVICE” Connect a USB device, and change the source to USB again.“COPY PRO” A copy-protected file is played.