Kenwood KMM-BT508DAB Instruction Manual

ENGLISH 35Antenna installation1 Remove the front pillar cover of your car.Front pillar2 Clean the windscreen with the supplied cleaner (I).(I)– Wait until the glass surface is completely dry beforeproceeding.– Warm the surface of the windscreen with defroster if it iscold (during winter).3 Remove the separator (tag 1) of film antenna (F)horizontally and paste the antenna on the windscreen.Separator (tag 1)Do not touch the pasting surface (adhesive side) of the filmantenna (F).4 Rub the film antenna gently onto the windscreen in thedirection of the arrow shown to allow it to stick firmly.5 Remove the separator (tag 2) of film antenna (F)vertically.(F)Separator (tag 2)6 Set the position of the protrusion of the amplifier unit(G) with the K mark on the film antenna (F) and paste.Do not touch the lead terminal or the pasting surface(adhesive side) of the amplifier unit (G).• When installing the antenna on the right sideEarth sheetSet the position ofthe protrusion withK markLead contact of the amplifier unit(metal part)Lead terminal of thefilm antenna (F)• When installing the antenna on the left side(G)(F)Earth sheetInstallation/Connection