Kenwood KMM-BT728HD Instruction Manual

Also see for KMM-BT228U: Quick start guide

10 ENGLISHOther settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), thenpress the knob.3 Repeat step 2 until the desired item is selected/activated or follow theinstructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .Default: [XX][TUNER SETTING][SEEK MODE] Selects the searching method for S / T buttons when pressed.[AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a presetstation. ; [MANUAL]: Manually search for a station.[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;[NO]: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)[MONO SET] [ON]: Improves the FM reception, but the stereo effect will be lost. ;[OFF]: Cancels.[NEWS SET] (For )[ON]: The unit will temporarily switch to News Programme if available. ;[OFF]: Cancels.[REGIONAL] (For )[ON]: Switches to another station only in the specific region using the “AF”control. ; [OFF]: Cancels.[AF SET] (For )[ON]: Automatically searches for another station broadcasting the sameprogram in the same Radio Data System network with better receptionwhen the current reception is poor. ; [OFF]: Cancels.Radio (for / / / / )• “ST” indicator lights up when receiving an FM stereo broadcast withsufficient signal strength.• The unit switches to FM alarm automatically when receiving an alarmsignal from FM broadcast.Search for a station1 Press B SRC repeatedly to select RADIO.2 Press BAND repeatedly (or press #FM+/*AM– on the remote control)to select FM1/FM2/FM3/AM.3 Press S / T (or press S / T (+) on the remote control) tosearch for a station.You can store up to 18 stations for FM and 6 stations for AM.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (orpress one of the number buttons (1 to 6) on the remote control).Direct Access Tuning (using the remote control)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a station frequency.3 Press ENT IW to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuning isautomatically canceled.