Kenwood KMM-BT728HD Instruction Manual

Also see for KMM-BT228U: Quick start guide

42 ENGLISH(For / )Each time you press DISP, the display information changes.• If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information(eg. station name) appears or display will be blank.Main displaySource name Display information: Main displaySTANDBY Source name/Clock Clock back to the beginningRADIO Source name/Clock Frequency Clock back to the beginningFor FM Radio Broadcast Data System stations only:Source name/Clock Station name/Program type Radio textRadio text+ Radio text+ song title/Radio text+ artist FrequencyClock back to the beginningUSB For MP3/WMA/AAC/WAV/FLAC files:Source name/Clock Song title/Artist Album title/Artist Folder nameFile name Playing time Clock back to the beginningiPod USB/iPod BT When [MODE OFF] is selected (page 12):Source name/Clock Song title/Artist Album title/Artist Playing timeClock back to the beginningPANDORA/PANDORA BTSource name/Clock Station name Shared/Radio Title ArtistAlbum title Playing time Clock back to the beginningSPOTIFY/SPOTIFY BTSource name/Clock Context title Song title Artist Album titlePlaying time Clock back to the beginningBT AUDIO/ALEXASource name/Clock Song title/Artist Album title/Artist Playing timeClock back to the beginningAUX Source name/Clock Clock back to the beginningReferencesSymptom RemedyGeneralSound cannot be heard. • Adjust the volume to the optimum level.• Check the cords and connections.“MISWIRING CHECK WIRINGTHEN PWR ON” appears.Turn the power off, then check to be sure the terminalsof the speaker wires are insulated properly. Turn thepower on again.“PROTECTING SEND SERVICE”appears.Send the unit to the nearest service center.Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 6)• Sound cannot be heard.• The unit does not turn on.• Information shown on thedisplay is incorrect.Clean the connectors. (Page 39)The unit does not work at all. Reset the unit. (Page 4)Correct characters are notdisplayed.• This unit can only display uppercase letters, numbers,and a limited number of symbols.• Depending on the display language you have selected(page 7), some characters may not be displayedcorrectly.(For )“SET ERROR”/“DEL ERROR”Setting/deleting the remote control ID is unsuccessful.Turn the power off, then turn on the power and performthe operation again. (Page 7)HD RadioTuner/Radio • Radio reception is poor.• Static noise while listeningto the radio.Connect the antenna firmly.USB/iPod Playback order is not asintended.The playback order is determined by the order in whichfile name were recorded (USB).Elapsed playing time is notcorrect.This depends on the recording process earlier (USB).Troubleshooting