Kenwood KOS-V1000 Instruction Manual

Also see for KOS-V1000: Training guide Instruction manual Service manual

Contents

60 KOS-V1000Setup MenuSystem SetupYou can set up the system parameters.1 Display the System SETUP screenTouch [System SETUP] in the SETUP Menu(page 58).2 Setup each item14231 Turns the key touch tone On or Off. ( On)2 Allows scrolling of text display on theSource Control screen. ( Auto)"Auto": Scrolls the screen automatically."Manual": Allows you to scroll the screenmanually.3 Selects a remote control signal. ( On)When turned "Off", the remote control of TVreception is rejected.4 Returns to the original screen.5765 Controlling the built-in amplifier.* ( On)"On": Uses the built-in amplifier."Off": Uses the optional amplifierconnected to this unit.6 Sets the tuner source.* ( On)"On": Uses the built-in tuner to receive aradio station."Off": Uses the tuner of your vehicle toreceive a radio station.7 Returns to the original screen.⁄• * In order to receive a radio station with the built-intuner, you need to connect an antenna cord. Refer to (page 84).• * Setting can be made only in standby mode.AV Interface SetupYou can set audio and visual (AV) interfaceparameters.1 Display the AV Interface screenTouch [AV Interface] in the SETUP Menu (page58).2 Setup each item152341 Sets a name to be displayed when youselect a system that is connected via the AVINPUT1 port. ( VIDEO1)⁄• If you have set the navigation system connectionto "AV-IN", the display is fixed to "NAV1".2 Sets an image display of the system that isconnected via the AV INPUT2 port. ( Off )"Off": When the image source is switched,an image entered via the AV INPUT2port is displayed."On": When an image signal is entered viathe AV INPUT2 port, this image isdisplayed.3 Sets a name to be displayed when youselect an image of the system that isconnected via the AV INPUT2 port.( VIDEO2)