Kenwood KR-V7070 Instruction Manual

Also see for KR-V7070: Instruction manual Instruction manual

eee KR-V7070 [EnMake connection as shown below.f When connecting the related system components, refer also pla une U an of misrocemputer 2 - -to the instruction manuals of the related components. @, If operation is not possible or erroneous display appearsDo not plug in the power lead until all connections are even though all connections have been made properly,completed. reset the microcomputer referring to “In case of diffi-culty”. - [P.26Videodeck1MonitorTVAudio|OUTLDPlayerorVideodeck2_f }209 oooe SeVentilation fanShape AC outletsomOther countriesoirVideo cordTo wallAC outletVentilation fanThe fan rotates during high-power reproduc-tion. To allow the ventilation, install the com-ponent by reserving a certain distancebetween its rear and the wall,Automatic operationIf you connect other KENWOOD components (i.e. a cassette deck or CD player) to this unit's SYSTEM CONTROL, this unit’s input selector willautomatically switch to that component when you start playback from it. This also works when you use the remote control.(Autematic operation is not possible with TAPE DECK 2 ar VIDEO machines.}1. Connect ali cords firmly. If connections are loose, there could be loss of sound or noise produced.2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unpluggingconnection cords without removal of the power cord can cause malfunctions or damage to the unit.3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.4. Insert the system control plugs completely into the jacks.5. If the system control cords or audio cords are not connected properly, the remote control or automatic operation between systemcomponents will not work properly.