Kenwood KRC-108S Instruction Manual

Contents

Store the frequency of a station. You can then recall thatstation with a single touch of a button.Select the band/ station that you want to have stored.Press the button (#1-6) that you want to use for the station, forat least two seconds.The button number blinks once in the display to indicate thatthe data has been stored.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.21Station Preset MemoryYou can choose between auto seek tuning of receivablefrequencies and manual tuning.Press the SRC (source) button repeatedly to select the tunermode."TUuE" is displayed when the tuner mode has beenselected.Press the BAND button to select the band.Each time you press the BAND button, the band switchesbetween FM1, FM2, FM3, and AM.Press the AUTO button to switch between auto seek tuningand manual tuning.The AUTO indicator lights up only when auto seek tuning isselected.• Auto Seek TuningPress the ¢ button to seek higher frequencies.Press the 4 button to seek lower frequencies.• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.The STEREO indicator lights up when stereo broadcasts are beingreceived.NOTE4321Tuning— 8 —KRC-108SAUTO / AMEBAND /CRSCatorFrequencySTEREO indicatorPreset station numberndicatorPM Page 8