Kenwood KRC-369 Instruction Manual

Contents

ANT.CONT.P.CONTILLUMITEL MUTEFRONT • LFRONT • RREAR • LREAR • R–+— 17 —FM/AM antenna input 1Rear left output (White) 23Rear right output (Red) 28Fuse (10A)242 KENWOOD disc changer control inputWiring harness(Accessory1)2529White/Black32Gray/Black38Purple/BlackWhite31Gray34Green37Purple40To front leftspeaker 30To front rightspeaker 33To rear rightspeaker 39To rear leftspeaker 36Ignition wire (Red) 20Battery wire (Yellow) 21Ground wire (Black) · (To car chassis) 22Ignition keyswitch10Car fuse box(Main fuse)11ACC 13Car fusebox 14Battery 12If no connections are made, do not let the wire come out from the tab.4Front left output (White)(KRC-569 only) 26Front right output (Red)(KRC-569 only) 27To connect the Disc changer,consult your Disc changermanual. 3Connecting Wires to Terminals35Green/BlackPower control wire (Blue/White) 15Motor antenna control wire (Blue)175 When using the optional power amplifier,connect to its power control terminal.7 Depending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal forthe booster amplifier of the film-type antenna.Not Used 19Do not let the wire comeout from the tab. 4b