Kenwood KRC-478R<u>/RV</u> Instruction Manual

–+++++FRONT • LFRONT • RREAR • LREAR • RFRONTP.CONT.OUTANT.CONT.— 27 —Connecting Cables to TerminalsISO connector unsupported car (KRC-478R/378R/33R only)nRear right output (Red)Rear left output (White)Front left output (White)(KRC-478R/478RV only)Front right output (Red)(KRC-478R/478RV only)KENWOOD disc changer/ DAB control inputFM/AMantenna inputTo connect the Disc changer orDAB unit, consult each manual.NOTEWiring harness(Accessory1)TEL mute terminalFuse (10A)Plug (P.29)White/BlackGray/BlackGreen/BlackPurple/BlackWhiteGrayGreenPurpleTo front leftspeakerTo front rightspeakerTo rear rightspeakerTo rear leftspeakerTo connect the KENWOODnavigation system, consultyour navigation manual.NOTEWhen only two speakers are being connected tothe system, connect the connectors either to boththe front output terminals or to both the rearoutput terminals (do not mix front and rear). Forexample, if you connect the + connector of theleft speaker to a front output terminal, do notconnect the - connector to a rear outputterminal.2CAUTIONIf you connect the ignition cable (red) and thebattery cable (yellow) to the car chassis (ground),you may cause a short circuit, that in turn maystart a fire. Always connect those cables to thepower source running through the fuse box.2WARNINGIgnition cable (Red)Battery cable (Yellow)Ground cable (Black) - (To car chassis)Ignition keyswitchCar fuse box(Main fuse)ACCCar fuse boxBatteryPower Control terminal(P.28)Power control/ Motor antennacontrol cable (Blue/White)Connect either to the power control terminalwhen using the optional power amplifier, orto the antenna control terminal in the vehicle.If no connections are made, do not cut the tube off fromthe edge of the cable.Antenna Conversion Adaptor(ISO–JASO) (Accessory3)Antenna Cord (ISO)