Kenwood KRC-479R Instruction Manual

Also see for KRC-35R: Service manual Instruction manual Instruction manual

Kenwood KRC-479R Instruction Manual Manual pdf 6 page image

You can recall the best audio setting preset for different typesof the music.Switching the Preset Sound Setting:Each time you press the Q button, the preset sound settingswitches as follows:As you proceed, each indicator would go on.The System Q function changes the values of the followingsound quality parameters:Bass centre frequency, bass level, bass quality factor, bassextend, middle centre frequency, middle level, middle qualityfactor, treble centre frequency, and treble level.NOTEFlatEasyRockJazzPopsTop 40Scan of Flat – Easy(Default setting)System QThis function amplifies low and high tones when the volume isturned down.The LOUD indicator lights up, when the loudness function ison.Turning Loudness On/Off:Hold down the LOUD button for one second or more to switchthe loudness on and off.Loudnessfunction under Menu settings (page 25).Switching Modes:Each time you press the SRC button, the mode switches asfollows:Selecting the standby mode:Press the SRC button repeatedly to select to "ALL OFF" .When "ALL OFF" is displayed, the standby mode is turned on.The standby mode turns all functions off although leaving theunit’s power on. Use this mode when you want to have thedisplay illuminated but do not want to listen to anything.• The mode switches to the next mode from any mode whichcannot be used.• The external disc control mode will differ depending on the unitthat is connected.• To enable the selection of External disc control mode 2/AUXmode, you should connect optional switching adapter KCA-S210A (which allows you to select both External disc controlmode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) orswitching adapter CA-C1AX (which allows you to select AUXmode only).During the AUX mode, "AUX" will show in the display. When theCA-C1AX is being used, the AUX Mode will replace the ExternalDisc Control Mode.• If you have selected Standby mode, the timer function thatturns the power off automatically will be activated.To find out how to set the time on the timer, and how to cancelthe timer function, refer to the section on the Power OFF TimerNOTEtTuner modetTape modetExternal disc control mode 1tExternal disc control mode 2 / AUX modetStandby modeSwitching ModesGeneral features— 6 —English