Kenwood KRC-479R Instruction Manual

Also see for KRC-35R: Service manual Instruction manual Instruction manual

Kenwood KRC-479R Instruction Manual Manual pdf 9 page image

Press the SRC button repeatedly until the tuner mode isobtained. "TUNER" is displayed only when the tuner mode isselected.Press either the FM or AM button to select the band.Each time you press the FM button, the band switchesbetween the FM1, FM2 and FM3.Press the AM button to select the MW and LW bands.• Auto Seek TuningPress the ¢ button to seek increasing frequencies.Press the 4 button to seek decreasing frequencies.• Preset station seek tuningPress the ¢ button to move to the next preset station (i.e.,the one with the next highest number), and the 4 button tomove to the last preset station (i.e., the one with the nextlowest number).If the frequencies stored at the preset numbers receivestations which were not originally memorized when travellinglong distances, the preset number is not displayed. In suchcases, pressing the 4/¢ button to use preset stationseek will receive channel 1.• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.• The ST indicator lights up when stereo broadcasts are beingreceived.• Please see the menu settings about selecting tuning mode.(page 23)NOTENOTE321TuningTuner features— 9 —#1 – 6 CLK4 ¢SRCFMAMSCRL T.CALLST indicatorFrequencyPreset station numberBand display