Kenwood KRC-535 Instruction Manual

Also see for KRC-535: Instruction manual Service manual

— 25 —ANT CONTILLUMIP.CONT++++FRONT • LFRONT • RREAR • LREAR • R–+REAR FRONTRLFM/AM antenna input 1510 Rear left output (White)11 Rear right output (Red) Fuse (10A) 27Wiring harness(Accessory1)2228White/Black31Gray/Black34Green/Black37Purple/BlackWhite30Gray33Green36Purple39To front leftspeaker 29To front rightspeaker 32To rear rightspeaker 38To rear leftspeaker 35Ignition wire (Red) 46Battery wire (Yellow)47Ground wire (Black) - (To car chassis) 48Ignition keyswitch 41Car fusebox(Main fuse)42ACC 44Car fuse box 45Battery43If no connections are made, do not let the wire come out from the tab. 314 Front left output (White)13 Front right output (Red)Power control wire (Blue/White)16Motor antenna control wire (Blue)17Dimmer control wire (Orange / White)194 When using the optional power amplifier,connect to its power control terminal.7 To car light control switch5 Depending on what antenna you are using, connecteither to the control terminal of the motor antenna, orto the power terminal for the booster amplifier of thefilm-type antenna.To KENWOOD disc changer/DAB control input/KPA-SD100/KPA-HD100/KPA-SS100 25To connect these leads,refer to the relevantinstruction manuals. 26Connecting Wires to Terminals