Function of the KRC-V679RYou can set the display to a desired colour.Display and setting:Select the display "Color" during the selecting function in themenu mode.To set a colour manually:Hold down on the 4 or ¢ button.Pressing the ¢ button advances the colour, and pressing the4 button reverses it.When the desirable colour is appeared, release the button.To make the popular colours appear:Press the preset button(#1-4) for the desired color.The buttons #1-4 are preset for the following four colours:#1: White#2: Red#3: Blue#4: Blue GreenTo switch colours depending on the situation:(Situational Mode)Each time you press the #6 button, the mode switches asfollows:4321Variable Illumination Colour Setting"Graphic ON" : The display will turn on by using the whole partof the display. (Default setting)"Graphic OFF" : The display will turn on by using only the upperpart of the display and the IN indicator .This function allows you to turn off the lower part of thedisplay if there is too much information in the display.Display and setting:Switching Graphic DisplayYou can switch the colour of the button illumination betweengreen and red.Display and setting:“Button Green” : The colour of the illumination is green.“Button Red” : The colour of the illumination is red.Selectable IlluminationWith automatic time adjustment, you can set the clock timeautomatically according to time data sent from RDS stations(after receiving RDS signals for several minutes). You can alsoset the time manually if the automatic time adjustmentfunction is turned off.Display and setting:"SYNC ON" : Automatic time adjustment (Default setting)"SYNC OFF" : Manual time adjustmentAdjusting Time Automatically:Tune into an RDS station for 3 or 4 minutes.The time adjusts automatically to the correct local time.The time is not adjusted when the RDS station you are tuned tois not transmitting a time signal. Choose another RDS station insuch a case.NOTEAutomatic Time AdjustmentMenu settings— 28 —English