Kenwood KRC-PS655 Instruction Manual

Also see for KRC-605: Instruction manual Instruction manual

F {Disc control mode{ ‘| PROBLEM POSSIBLE CAUSE : SOLUTIONThe disé control mode cannot No wire has been connected to the disc.changer input Connect the wire to the disc changer input terminal on thebe selected. terminal on the unit. unit.The specified disc does not The specified CD is very dirty. Clean the CD.play, but another one plays : -instead: The CD is upside-down. . Load the CD with the labelled side up.The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the: specified disc.The disc is severely scratched. Try another disc instead.The sound skips. Something is touching the disc changer. Remove whatever is touching it.The CD is scratched or dirty. If skipping happens at the same place when the car isstopped, something is wrong with the CD. Clean the CD.The display shows that the The computer chip in the unit is not functioning normally. Press the reset button on the unit (see paged).changerlis being played, but nosound can be heard.ThespecifiedtrackdoesnotRandomplayormagazine randomplayhasbeenselected. Turnofftherandomplayormagazine randomplay function.play.:eS eee41

/ 43

Related manuals for Kenwood KRC-605