Kenwood KRC-PS959R Instruction Manual

Also see for KRC-759R: Service manual Service manual Instruction manual

Contents

Kenwood KRC-PS959R Instruction Manual Manual pdf 28 page image

— 28 —EnglishDisc control features (See page 7)Disc Name Preset Play (DNPP)If you have preset the name of a disc that you want to listento in the disc changer, you can look for it by name and startplaying it.Press the DNPP button on the remote control."DNP PLAY" will appear in the display, and the disc namepreset play mode is entered.The preset names/disc titles of the disc in the disc changer towhich you are currently listening are successively displayed forfive seconds each.In any of the units that are connected, discs that have not beendisc name preset will display "NO NAME".• This function can only be used in disc changers that weremanufactured or sold as of 1997. Also note that some unitscannot provide a display unless the disc name preset has beenmade by the unit that is playing.• Discs in the disc changer that have never been played beforewill appear as "NO ACCESS" when the disc names aredisplayed. When you cannot identify a disc because of the "NOACCESS" display after inserting a disc magazine, try playing itusing the disc scan or a similar function to display the discname. Also note that "NO DISC" will be displayed when a dischas not been loaded.Rapid display (forward / reverse):Press the DISC + or DISC – button.Pressing the DISC + button will rapidly display the presetnames/disc titles in order.Pressing the DISC – button will rapidly display the presetnames/disc titles in reverse order.When the name appears for the disc you want to playPress the OK button.The disc whose name is displayed will be recalled, and the discname preset play (DNPP) mode will end.To cancel DNPP mode:Press the DNPP button.The disc name preset play (DNPP) mode will be cancelled.2NOTE1Function of Remote control with DNPP button (See page 8)