Kenwood KRF-V4080D Instruction Manual

15 ENENGLISH1 Strip coating. 2 Push the lever.3 Insert the cord. 4 Return the lever.+-+-GNDAMANTENNAFM75ΩSetting up the systemConnecting the terminalsSpeaker impedanceAfter confirming the speaker impedance indications printed on therear panel of this model, connect speakers with matching impedanceratings. Using speakers with a rated impedance other than thatindicated on the rear panel of this model could result in malfunctionsor damage to the speakers or this model.• Never short circuit the + and – speaker cords.• If the left and right speakers are connected inversely or the speakercords are connected with reversed polarity, the sound will beunnatural with ambiguous acoustic imaging. Be sure to connect thespeakers correctly.Connecting the antennasAM loop antennaThe supplied loop antenna is for use indoors. Place it as far as possiblefrom this model, TV set, speaker cords and power cord, and adjust thedirection for best reception.FM indoor antennaThe supplied indoor antenna is for temporary use only. For stablesignal reception we recommend using an outdoor antenna. Disconnectthe indoor antenna when you connect one outdoors.FM outdoor antennaLead the 75Ω coaxial cable connected to the FM outdoor antenna intothe room and connect it to the FM 75ΩΩΩΩΩ terminal.AM antenna terminal connections1 Push lever. 2 Insert cord. 3 Release lever.FM antenna terminal connectionsInsert cord.Use an antennaadapter(Commerciallyavailable)Attach to thestandAM loop antennaFM indoor antennaFM outdoor antenna