Kenwood KRF-V4080D Instruction Manual

24 ENENGLISHListening to radio broadcastsUsing the RDS DISPLAY keyRDS DISPLAYPressing the RDS DISPLAY key changes the contents of thedisplay.Each press switches the display mode as follows:1 PS (Program Service name) display2 RT (Radio Text) display3 Frequency display1 PS (Program Service name) display:The station name is displayed automatically when an RDS broadcastis received.If no PS data was sent, “NO PS” is displayed.2 RT (Radio Text) display:Text data accompanying the RDS broadcast scrolls across the display.“NO RT” or “RT----” is displayed if the current RDS station does notprovide RT data.3 Frequency display:Displays the frequency of the current station.Presetting RDS stations (RDS AUTO MEMORY)This function automatically stores up to 40 RDS stations in the presetmemory. In order to use the PTY function, the RDS stations must bestored in the preset memory using the RDS AUTO MEMORY function.INPUT SELECTORBAND AUTOMEMORY1Use the INPUT SELECTOR knob to select the tuner.2Use the BAND key to set the broadcast band to “FM”.3Press and hold the MEMORY key for more than 2 seconds.• After a few minutes, up to 40 RDS stations are preset in order fromchannel “01”.• Stations already stored in the preset memory may be replaced byRDS stations. (i.e., If the RDS AUTO MEMORY function detects 15RDS stations, the stations currently preset at numbers 01~15 willbe replaced by the RDS stations.)