Kenwood KRF-V5020 Instruction Manual

Also see for KRF-V5020: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Kenwood KRF-V5020 Instruction Manual Manual pdf 27 page image

27OtherKRF-V7020/V6020/V5020 (En/T)Specifications Caution : Read this page carefully to ensure safeoperation.Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).AUDIO sectionRated power output during STEREO operationKRF-V7020(DIN) 1 kHz, 0.7% at 4 Ω .......................................... 100 W + 100 WKRF-V6020, KRF-V5020(DIN) 1 kHz, 0.7% at 4 Ω ............................................... 80 W + 80 WEffective power output during SURROUND operationKRF-V7020FRONT (1kHz, 0.7% T.H.D. at 4 Ω one channel driven).............................................................................. 100 W + 100 WCENTER (1kHz, 0.7% T.H.D. at 4 Ω one channel driven)............................................................................................. 100 WSURROUND (1kHz, 0.7% T.H.D. at 4 Ω one channel driven).............................................................................. 100 W + 100 WKRF-V6020, KRF-V5020FRONT (1kHz, 0.7% T.H.D. at 4 Ω one channel driven).................................................................................. 80 W + 80 WCENTER (1kHz, 0.7% T.H.D. at 4 Ω one channel driven)............................................................................................... 80 WSURROUND (1kHz, 0.7% T.H.D. at 4 Ω one channel driven).................................................................................. 80 W + 80 WTotal harmonic distortion ........................... 0.05% (1 kHz, 40W, 4 Ω)Frequency responseCD ............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dBSignal to noise ratioPHONO (MM) ......................................................... 75 dB (IHF'66)CD .......................................................................... 93 dB (IHF'66)Input sensitivity / impedancePHONO (MM) ......................................................... 2.5 mV / 27 kΩCD ......................................................................... 200 mV / 47 kΩDVD 6CH (SUBWOOFER) ................................... 200 mV / 10 kΩOutput level / impedanceTAPE REC .......................................................... 200 mV / 2.2 kΩPRE OUT (CENTER, SURROUND) ........................... 1 V / 2,2 kΩPRE OUT (SUBWOOFER) ......................................... 2 V / 2.2 kΩTone controlBASS ............................................................... ±10 dB (at 100 Hz)TREBLE .......................................................... ±10 dB (at 10 kHz)VIDEO sectionVIDEO inputs / outputsVIDEO (composite) ............................................ 1 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................... 87.5 MHz ~ 108 MHzUsable sensitivity (DIN, 75 Ω)MONO .................... 1.2 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)STEREO .................. 45 μV / 44.2 dBf (46 kHz DEV., S/N 46 dB)Total harmonic distortion (DIN, 1 kHz)MONO ......................................................... 0.2% (65.2 dBf input)STEREO ...................................................... 0.8% (65.2 dBf input)Signal to noise ratio (DIN weighted, 1 kHz)MONO ................................ 65 dB (40 kHz DEV., 65.2 dBf input)STEREO ............................ 60 dB (46 kHz DEV., 65.2 dBf input)Stereo separation (DIN, 1 kHz) .................................................. 36 dBSelectivity (DIN, ±300 kHz) ........................................................ 64 dBFrequency response (30 Hz ~ 15kHz) .................. +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range .................................... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod., S/N 20 dB)........................................................................ 16 μV / (600 μV/m)Signal to noise ratio (30% mod., 1 mV input) .......................... 50 dBGENERALPower consumption .................................................................. 230 WAC outletSWITCHED .................................................. 2 (total 150 W max.)Dimensions ....................................................................... W : 440 mmH : 144 mmKRF-V7020 ................................................................. D : 400 mmKRF-V6020, KRF-V5020 ............................................ D : 390 mmWeight (Net)KRF-V7020 .......................................................................... 9.2 kgKRF-V6020 .......................................................................... 8.4 kgKRF-V5020 .......................................................................... 8.2 kg

/ 28

Related manuals for Kenwood KRF-V5020