Kenwood KRF-V5100D Service Manual

Also see for KRF-V5100D: Instruction manual

KRF-V5100D/V6100D29SPECIFICATIONSSpecifications (For Europe)AUDIO sectionRated power output during STEREO operationDIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω)............................................................................... 100 W + 100 WEffective power output during STEREO operationRMS(1 kHz, 10% T.H.D., at 6 Ω) .............................. 120 W + 120 WEffective power output during SURROUND operationFRONT(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ... 100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) .... 120 W + 120 WCENTER(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ................... 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) .................... 120 WSURROUND(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ... 100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) .... 120 W + 120 WSURROUND BACK (KRF-V6100D)(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ................... 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) .................... 120 WTotal harmonic distortion ......................... 0.05 % (1 kHz, 50 W, 6 Ω)Frequency response (IHF’66)CD/DVD ..................................... 20 Hz ~ 70 kHz, +0 dB ~ –3.0 dBSignal to noise ratio (IHF’66)CD/DVD ................................................................................. 95 dBInput sensitivity / impedanceCD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 47 kΩDVD/6CH INPUT .................................................. 550 mV / 15 kΩOutput level / impedanceMD/TAPE REC ....................................................... 550 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩPRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at –30 dB level ...................................... +8 dB (100 Hz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩS-VIDEO inputs /outputs (KRF-V6100D)S-VIDEO (luminance signal) .................................. 1 Vp-p / 75 ΩS-VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 ΩCOMPONENT VIDEO inputs /outputs (KRF-V6100D)COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/CR-signal) ................. 0.7 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivity (DIN at 75 Ω)MONO ..................... 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)STEREO ................... 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)Total harmonic distortion (DIN at 1 kHz)MONO .......................................................... 0.2% (71.2 dBf input)STEREO ....................................................... 0.8% (71.2 dBf input)Signal to noise ratio (DIN weighted at 1 kHz)MONO ................................. 65 dB (40 kHz DEV., 71.2 dBf input)STEREO .............................. 60 dB (46 kHz DEV., 71.2 dBf input)Stereo separation (DIN 1 kHz) ................................................... 36 dBSelectivity (±300 kHz) ................................................................. 64 dBFrequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range .................................... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod, S/N 20 dB) ......... 16 μV / (600 μV/m)Signal to noise ratio (30% mod, 400 Hz).................................................................. 50 dB (60 dBμV EMF input)GENERALPower consumption ................................................................. 280 WStandby Power consumption ................................... less than 0.9 WAC outletSWITCHED ........................................................ (total 90 W max.)Dimensions .................................................... W: 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net) .............................................................. 7.8 kg (17.2 lb)Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).HOW TO READ THE PARTS LISTABBREVIATION OF MODEL AND MASSPRODUCTION'S DESTINATIONSMODEL ABB. Australia EuropeX EKRF-V5100D B 5 X2 E2KRF-V5100D-S S X3 E3KRF-V6100D B 6 X4 E4KRF-V6100D-S S X1 E1

/ 30

Related manuals for Kenwood KRF-V5100D