Kenwood KRF-V5100D Service Manual

Also see for KRF-V5100D: Instruction manual

KRF-V5100D/V6100DSPECIFICATIONSSpecificationsAUDIO sectionRated power output during STEREO operationDIN/IEC (63 kHz ~ 12.5kHz, 0.7% T.H.D., at 8 Ω)............................................................................... 100 W + 100 WEffective power output during STEREO operationRMS (1 kHz, 10 % T.H.D. at 8 Ω) ............................. 120 W + 120 WEffective power output during SURROUND operationFRONT(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven) ..... 100 W + 100 W(1 kHz, 10% T.H.D. at 8 Ω one channel driven) ...... 120 W + 120 WCENTER(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven) ........................ 100 W(1 kHz, 10% T.H.D. at 8 Ω one channel driven) ......................... 120 WSURROUND(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven) ..... 100 W + 100 W(1 kHz, 10% T.H.D. at 8 Ω one channel driven) ...... 120 W + 120 WSURROUND BACK (KRF-V6100D)(1 kHz, 0.7 % T.H.D. at 8 Ω one channel driven) ................... 100 W(1 kHz, 10 % T.H.D. at 8 Ω one channel driven) .................... 120 WTotal harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8 Ω)Frequency response (IHF’66)CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD ................................................................................. 95 dBInput sensitivity / impedanceCD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 47 kΩDVD/6CH INPUT ................................................. 550 mV / 15 kΩOutput level / impedanceMD TAPE REC ........................................................ 550 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩPRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩS-VIDEO inputs /outputs (KRF-V6100D)S-VIDEO (luminance signal) .................................. 1 Vp-p / 75 ΩS-VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 ΩCOMPONENT VIDEO inputs/outputs (KRF-V6100D)COMPONENT VIDEO (luminance signal) ............... 1 Vp-p/75 ΩCOMPONENT VIDEO (CB/CR-signal) ................... 0.7 Vp-p/75 ΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivity (MONO)................... 1.6 μV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO ..................................................... 28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO .......................................................... 0.5% (71.2 dBf input)STEREO ....................................................... 0.7% (71.2 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO ........................................................ 75 dB (71.2 dBf input)STEREO ..................................................... 68 dB (71.2 dBf input)Stereo separation (1 kHz) ........................................................... 40 dBSelectivity (±400 kHz) ................................................................. 50 dBFrequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range ..................................... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod., S/N 20dB) ......... 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input).......................................................... 50 dB (60 dBμV EMF input)GENERALPower consumption ................................................................... 280WStandby Power consumption ................................... less than 1.3 WAC outletSWITCHED .................................................. (total 90 W max.)Dimensions .................................................... W : . 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net) .................................................................. 7.8 kg (17.2 lb)100 watts per channel minimum RMS, both channels driven, at 8 from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)(For Australia)Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

/ 30

Related manuals for Kenwood KRF-V5100D