38 KRF-V5300DSpecificationsAUDIO sectionRated output power during STEREO operation(63 Hz – 12.5 kHz, 0.7% T.H.D., at 6 Ω).............100 W + 100 WEffective output power during STEREO operationRMS (1 kHz, 10% T.H.D., at 6 Ω) ......................... 120 W + 120 WEffective power output during SURROUND operationFRONT(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 WCENTER(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ..............100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ...............120 WSURROUND(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 WTotal harmonic distortion .............................0.05 % (1 kHz, 50 W, 6 Ω)Frequency response (IHF’66)CD/DVD .....................................20 Hz – 70 kHz, +0 dB – –3.0 dBSignal to noise ratio (IHF’66)CD/DVD ..............................................................................100 dBInput sensitivity / impedanceCD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 40 kΩAV AUX ................................................................ 550 mV / 50 kΩDVD/6CH INPUT ................................................. 550 mV / 27 kΩOutput level / impedanceREC OUT (MD/TAPE, VIDEO 1) ........................... 550 mV / 470 ΩPRE OUT (SUBWOOFER) ........................................ 1.5 V / 1.5 kΩTone controlBASS ............................................................... ±10 dB (at 100 Hz)TREBLE ........................................................... ±10 dB (at 10 kHz)DIGITAL AUDIO sectionSampling frequency .................32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / wave lengthOptical ......................... –15 dBm – –21 dBm / 660 nm ±30 nmInput level / impedanceCoaxial ...............................................................0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / impedanceVIDEO (composite) ..............................................1 Vp-p / 75 ΩVIDEO outputs / impedanceVIDEO (composite) ..............................................1 Vp-p / 75 ΩCOMPONENT VIDEO inputs/ impedance (For Australia)COMPONENT VIDEO (Y-signal) ...........................1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 ΩCOMPONENT VIDEO outputs/ impedance (For Australia)COMPONENT VIDEO (Y-signal) ...........................1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 ΩFM tuner sectionTuning frequency range .......................... 87.5 MHz – 108.0 MHzUsable sensitivity (DIN at 75 Ω)MONO .................. 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)STEREO ................. 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)Total harmonic distortion (DIN at 1 kHz)MONO .................................................... 0.2% (71.2 dBf input)STEREO .................................................. 0.8% (71.2 dBf input)Signal to noise ratio (DIN weighted at 1 kHz)MONO ............................ 65 dB (40 kHz DEV., 71.2 dBf input)STEREO ........................... 60 dB (46 kHz DEV., 71.2 dBf input)Stereo separation (DIN 1 kHz) ............................................36 dBSelectivity (DIN ±300 kHz) .................................................64 dBFrequency response (30 Hz – 15 kHz) .............. +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range ............................. 531 kHz – 1,602 kHzUsable sensitivity (30% mod., S/N 20 dB) .... 16 μV / (600 μV/m)Signal to noise ratio (30% mod.)...................................................... 50 dB (60 dBμV EMF input)GeneralPower consumption ........................................................... 250 WStandby power consumption ............................. less than 0.6 WDimensions ...............................................W: 440 mm (17-5/16")....................................................................H: 159 mm (6-1/4")............................................................... D: 338 mm (13-5/16")Weight (net) ......................................................... 8.1 kg (17.9 lb)Notes:1. Kenwood follows a policy of continuous advancements indevelopment. For this reason specifications may be changedwithout notice.2. The full performance may not be exhibited in an extremely coldlocation (under a water-freezing temperature).