Kenwood KRF-V5300D Instruction Manual

Also see for KRF-V5300D: Service manual

English 7Preparing the remote controlLoading batteriesLoading batteriesœ Remove the cover.∑ Insert batteries.• Insert two (R03) batteries following the polarity indications.é Close the cover.OperationOperationWhen the Standby indicator is lit, the power turns ON when youpress [ RECEIVER] on the remote control unit. When the powercomes ON, press the key you want to operate.Operating range (Approx.)Remote sensorInfrared ray systemStandby indicator• When pressing more than one remote control key successively,press the keys securely by leaving an interval of 1 second or morebetween keys.Notes:1. The supplied batteries may have shorter lives than ordinarybatteries due to use during operation checks.2. When the remote-controllable distance gets shorter than before,replace both batteries with new ones.3. Placing the remote sensor in direct sunlight, or in direct light froma high frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation toprevent malfunction.