Kenwood KRF-V6200D Instruction Manual

Also see for KRF-V6200D: Service manual Service manual

Contents

Kenwood KRF-V6200D Instruction Manual Manual pdf 23 page image

English 23Listening to a source componentVOLUME CONTROLVOLUME /oINPUT SELECTOR USB/AV AUXœ Select the source you want to listen to.When using the remote control unit:Use the Input source keys to select a source.The following input source keys are prepared on theremote control unit:• [TUNER] (FM/AM broadcast reception)• [CD/DVD]• [MD/TAPE]• [VIDEO1]• [VIDEO2]• [DVD/6CH]• [AUX]• [AV AUX]• [USB]When using the main unit:Use [INPUT SELECTOR] to select a source.The input sources change as shown below with [INPUTSELECTOR]:1 Tuner (FM/AM broadcast reception)2 "CD/DVD"3 "MD/TAPE"4 "VIDEO1"5 "VIDEO2"6 "DVD/6CH"7 "AUX"Use [USB/AV AUX] to select USB or AV AUX source.1 "USB"2 "AV AUX"∑ Start playback from the selected source.é Use [VOLUME %/fi] to adjust the volume.Listening to music withPURE AUDIO MODEThe PURE AUDIO MODE allows you to enjoy music sources inhigh-quality stereo.PURE AUDIO MODEPURE AUDIO MODEœ Select the music source you want to listen to.∑ Start playback from the selected source.é Press [PURE AUDIO MODE].• While in PURE AUDIO MODE, the listen mode is set to stereo.• PURE AUDIO MODE indicator lights up, the display will be turnedoff, and no video signal is output to the TV monitor.No video signal to the TV monitor.The display is turned off.PURE AUDIO MODE indicator lights up.To cancelPress [PURE AUDIO MODE] again.• PURE AUDIO MODE is also canceled when listen mode ischanged. See . ºNotes:• When the input mode is "6CH INPT", the listen mode does notchange. ( ™)• When the PURE AUDIO MODE is canceled, the listen moderemains in stereo if the input signal is digital.Input source keys