English 31DVD 6-channel playbackUsing a DVD player or the like equipped with six (5.1) outputchannels and this unit, you can enjoy surround sound playback.Connecting a DVD player which can decode the surround signalitself is also acceptable.INPUT SELECTORVOLUME CONTROLVOLUME /oINPUT MODEDVD/6CHPreparations• Connect your DVD player to the DVD/6CH INPUTjacks of this unit.• Turn on all other components that will be used.• Complete .œ Select "DVD/6CH" as the input source.∑ Press [INPUT MODE] to select "6CH INPT".é Start playback of a DVD disc.® Adjust the volume.Notes:• It is not possible to adjust the speaker level or sound effect([SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] willnot be functional) of the channels separately when this unit is inthe 6CH INPUT mode. Adjust the speaker level with the controlsof the DVD player. Refer to the Instruction manual of the DVDplayers for the detailed operating instructions.• For the powered subwoofer, you can adjust the volume of thesubwoofer using the subwoofer’s own volume control.Notes:• Depending on the type of the signal or speaker setting, somelisten modes cannot be selected.• When playback is started, the sound may be cut or interruptedbefore the input source is confirmed as Dolby Digital.• To enjoy Dolby Digital surround (as well as all the other listenmodes) from a single component, be sure to use a Dolby Digitalcompatible source component.• Dolby Digital or DTS signal having more channels than themaximum number of playback channels available using this unit’scurrent settings is input, downmixing is performed to match thenumber of available channels.• Some Dolby Digital Surround EX compliant discs do not containidentification signals. For this reason, the receiver may not detectthese discs as Dolby Digital EX when the input mode is set to "F-AUTO". In this case, set the listen mode to "DOLBY DIGITAL EX".96kHz LPCM playback96kHz LPCM playbackThis unit is compatible with the 96kHz LPCM playback. To play a96kHz DVD, set the listen mode to "STEREO".• In "F-AUTO" input mode, the listen mode will automatically beSTEREO.• When in "D-MANUAL" input mode (listen mode is not STEREO),"FS 96kHz" will appear in the display and no sound can be heardfrom the speakers.Press [LISTEN MODE] (the listen mode changes to the "STEREO"mode) to output sound from the speakers.
