Kenwood KRF-X7775D Connection And Setup Manual

Also see for KRF-X7775D: User guide User guide Service manual

Contents

15Chapter One : Connecting Your DevicesConnectionsConnecting Your VCR(s), continuedDo not plug in the receiver to AC power until you haveconnected all your devices.This section focuses on the connections from your VCR tothe KRF-X7775D. Please refer to your VCR’s instructionsfor more detail about its connection jacks and capabilities.The instructions in this section show one of several pos-sible variations on connecting your VCR. For further assis-tance on optional configurations, contact the store whereyou purchased your receiver.To Connect a Primary VCR:1. Review the information under “Before You Begin” onpage 1. It contains important notes about the types ofvideo connections you can make.2. Connect the audio and video cables from the VCR’sAudio and Video jacks to the receiver’s VIDEO1 RECOUT and PLAY IN jacks as shown to the left.3. Be sure to connect the VCR VIDEO IN cable to the jacklabeled REC OUT and the VIDEO OUT cable to the jacklabeled PLAY IN.4. Go to “Noting Your Devices” on page 3 and note whichjack you used to connect your VCR. In addition, notethe brand name and model number of the VCR.To Connect a Secondary VCR:1. Review the information under “Before You Begin” onpage 1. It contains important notes about the types ofvideo connections you can make.2. Connect the audio and video cables from the VCR’sAudio and Video jacks to the receiver’s VIDEO2 jacks.3. Go to “Noting Your Devices” on page 3 and note whichjack you used to connect your VCR. In addition, notethe brand name and model number of the VCR.