Specifications■ Front speaker. Center speaker. Rear speakerFront speaker Center speaker Rear speakerSystem 2 way(Magnetically shielded)2 way(Magnetically shielded)1 wayEnclosure Acoustic Air Suspension Acoustic Air Suspension Acoustic Air SuspensionLoudspeaker 100 mm(4”) Cone type(Full Range type)Woofer: 100 mm(4") Cone type 100 mm(4") Cone type —Tweeter: 50 mm(2") Cone type 50 mm(2") Cone type —Nominal Impedance 8 o 8Q 8 OPeak Input Power — 80 W 80 WMaximum Input Power 80 W 40 W 40 WSensitivity 88 dB / W at 1 m 88 dB / W at 1 m 85 dB / W at 1 mFrequency Response 100 Hz-20,000 Hz 100 Hz~20,000 Hz 100 Hz~20,000 HzCrossover Frequency 3,000 Hz 3,000 Hz —Dimensions Width: 129 mm(5-1/16") 129 mm(5-1/16") 129 mm(5-1/16")Height: 198 mm(7-13/16") 198 mm(7-13/16") 198 mm(7-13/16")Depth: 120 mm(4-3/4") 120 mm(4-3/4") 120 mm(4-3/4")Net Weight 1.2 kg (2.6 lb) /piece 1.0 kg (2.2 lb) 0.8 kg (1.8 lb) /piece■ Subwoofern System Subwoofer system with built-in amplifierAudio sectionOutput Power 50 Watts RMS, at 40 from 40 Hz to 160 Hzwith no more than 0.09% total harmonic distortionInput Sensitivity/ImpedanceRCA-type pin-plug jack (LINE IN): 100 mV/43 kC2, 200 mV/43 ka (MONO)Push-type terminals: 1.8V/1.2 kQTurn Over Frequency 80 Hz ~ 160 HzPhase Switching NORMAL, REVERSESpeakersection Enclosure Bass-ReflexLoudspeaker 200 mm (8") Cone typeNominal Impedance 40Frequency Response 40 Hz ~ 250 HzGeneralPower Consumption nowSupply Voltage AC120V, 60 HzDimensions Width: 286 mm (11-1/4")Height: 368 mm (14-1/2")Depth: 356 mm (14")Net Weight 11.2 kg (24.7 lb)Enclosure Finish High density particle board laminated with simulated wood grain vinyl.NOTE: THE GRILLES ON ALL THE SPEAKERS CANNOT BE REMOVED.Notes: -------1. Kenwood follows a policy of continuous advancements in development. For this reason, specifications may be changedwithou notice.2. Full performance may not be exhibited in extremely cold locations (below 0 deg. C).