Kenwood KTC-SR902 Instruction Manual

Also see for KTC-SR902 - Sirius Satellite Radio Tuner: Quick start guide Quick start guides

— 12 —EnglishOperations from Model-D Control UnitEvery receivable Channel is checked for 10 seconds.1 Select a scan item from the menu item list.2 Start Channel ScanPress the [4] or [¢] button for at least 1 second.The channel scan will start.3 Release it when the channel you want to listen to is receivedPress the [4] or [¢] button for at least 1 second, or pressthe [MENU] button to release the menu mode.Channel ScanSets the seeking mode.Press the [AUTO] button.Each time the button is pressed the Seek mode switches asshown below.Display Operation"Channel" Normal manual seeking control."Preset" Search in order of the channels in the Presetmemory.This function cannot be used in the category and channel searchmode.Switching Seek ModePutting the channel in the memory.1 Select the preset bandPress the [FM] button.2 Enter Memory modePress the [P.M] button for at least 1 second."Preset Memory" is displayed.3 Select the channel to put in the memoryPress the [4] or [¢] button.4 Select the preset numberPress the [FM] or [AM] button.5 Put the channel in the memoryPress the [P.M] button for at least 2 seconds.The preset number display blinks 1 time.6 Repeating steps 3 to 5 and putting the desired channel in thememory.On each band, 1 channel can be put in the memory on each [1]— [6].7 Exit Memory modePress the [P.M] button.• Only the channel number is stored. Category information is notstored.• You can set up to 6 memories even on a control unit with 8 presetbuttons.Channel Preset Memory