Kenwood KX-79CW Instruction Manual

A\Caution: Read this page carefully to ensure safe operation.Before applying poweraFor the U.S.A. and Canada For Australia and EuropeImportant!Units shipped to the U.S.A. and Canada are designed for opera-tion on 120 volts AC only.Safety precaution for a Polarized AC plugHowever, some products may be supplied with a non-polarizedplug.CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USETHIS (POLARIZED) PLUG WITH AN EXTENSION CORD,RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CANBE FULLY INSERTED TO PREVENT BLADE EXPOSURE.For the United KingdomImportant!Units shipped to the U.K. are designed for operation on240 volts AC only.The mains plug must be removed from the wall socket priorto any internal examination.The wires in this mains lead are coloured in accordance withthe following code:BIS ic ctiek sade ch pedadbeo sees chew nensents NeutralBROWN: -cccsv is etcnsauin is Aowtnaceehha eean LiveThe wires in this mains lead must be connected to the termi-nals in the plug as follows:Wire colour Plug terminal markingBlUSt eecatke touts otaced hostile te siegulsrteds N or BlackBrOWD sauce cssnaes fees Peecasaeanidisety Lor Red(> Brown toLiveBlue to LNeutral w )PlugNotes:— eee!1. If a 13-amp plug is used, this must be fitted with a 5-ampfuse.2. If a 3-pin plug with earthing contact is used, no wire mustbe connected to the E terminal. |Safety precautionsWARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCETO RAIN OR MOISTURE.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENImportant!Units shipped to Australia are designed for operation on 240 VAC only.Units shipped to Europe are designed for operation on 220 VAC only.For other countriesImportant!Units shipped to countries other than the above countries areequipped with an AC voltage selector switch on the rear panel.Refer to the following paragraph for the proper setting of thisswitch.AC voltage selectionThis unit operates on 110-120 or 220-240 volts AC. The ACvoltage selector switch on the rear panel is set to the voltagethat prevails in the area to which the unit is shipped. Beforeconnecting the power cord to your AC outlet, make sure thatthe setting position of this switch matches your line voltage.if not, it must be set to your voltage in accordance with thefollowing direction.Note: - ewes toate tine fo Sis ea areOur warranty does not cover damage caused by excessive linevoltage due to improper setting of the AC voltage selectorswitch.vo- ., <@AC110- ac220- "9 * acii0- AC220-AC240V~120V~ AC240V~ 120V~o~ ~Stopper Fig. 2 =)plate1. Before plugging in this unit, make sure that the position ofthe AC Voltage Selector conforms to your line (mains) vol-tage. If not, it must be reset. See Figure 1.2. To reset the selector, slide the stopper plate to the oppositeside with a screwdriver or other pointed tool. See Figure 2.3. Insert the power cord securely. See Figure 3.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVECOVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SER-VICING TO QUALIFIED SERVICE PERSONNEL.THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED ‘‘DANGEROUS VOL-TAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDETO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THEUSER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.KX-79CW (En)