17Preparation11 Complete the connections refer-ring to "System connections".62 Set up the cassette deck $3 (Load a disc in the CD player.): Keys or controls to be used in this operationConvenient CD recording (deck B only)By connecting this unit with a KENWOOD amplifier (receiver)with a SYSTEM CONTROL jack and a KENWOOD CD playerwith a SYSTEM CONTROL jack using system control cords,recording on this unit and playback on the CD player can bestarted simultaneously.Since this unit is not designed for recording with metal (TYPEIV) tapes, do not use metal tapes for recording.Adjust the recording level.2Press (7) STOP keyof the CD player.Press the 6 keyof the CD player.1 Play a CD. 4 Put the CD player in stop mode.2 Set the record-pause mode.÷ While pressing the PAUSE key,press the REC/ARM key.3 Adjust the recording recordinglevel.“How to record.” $¶REC/ARM8PAUSEStart playing the CD.4Press the 6 key of the CD player. ÷ Synchro recording is not possible when tracks of more than one CD areprogrammed using a Carrousel type CD player.÷ Recording starts at this moment.÷ When the CD player has completed playback, the cassette deck stopsrecording and enters the stop mode.To pause : Press the 6 key of the CD player.To restart recording : Press the 6 key of the CD player.To stop : Press the 7 key of the CD player. ÷ If the stop (7) key of the cassette deck is pressed, the cassette deckenters the stop mode but the CD player does not stop.(dB) — —5 0 +3 +6 (dB)TAPE BAUTO REVERSETAPE AAUTO REVERSEPOWER1@ #7 @ #7¡ 1 8PAUSE ¶REC/ARM¡PUSH/OPEN0PUSH/OPEN0The figure shows an example for the CT-403 or KXF-W3030Set the record-pause mode.3¶REC/ARM8PAUSE(dB) — —5 0 +3 +6 (dB)÷ While pressing the PAUSE key, press the REC/ARM key.