Kenwood KXF-W1030 Instruction Manual

Also see for CT-401: Service manual Service manual Service manual Service manual

Contents

Kenwood KXF-W1030 Instruction Manual Manual pdf 2 page image

2Introduction*AC voltage selectionThe AC voltage selector switch on the rear panel is set to the voltagethat prevails in the area to which the unit is shipped. Before connect-ing the power cord to your AC outlet, make sure that the settingposition of this switch matches your line voltage. If not, it must beset to your voltage in accordance with the following direction.Before applying power Caution: Read this section carefully to ensure safe operation.Units are designed for operation as follows.U.S.A. and Canada ...................................... AC 120 V onlyChina ............................................................ AC 220 V onlyAustralia ....................................................... AC 240 V onlyEurope and U.K. .......................................... AC 230 V only*Other countries ...... AC 110-120 / 220-240 V switchableMove switch lever to match your line voltage witha small screwdriver or other pointed tool.Note:Our warranty does not cover damage caused by excessive linevoltage due to improper setting of the AC voltage selector switch.AC voltage selector switchSafety precautions Caution: Read this section carefully to ensure safe operation.WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSETHIS APPLIANCE TO RAIN OR MOISTURE.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-MOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, RE-FER SERVICING TO QUALIFIED SERVICE PERSONNEL.THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRI-ANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DAN-GEROUS VOL-TAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENTMAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERTTHE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC-ING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shippedto you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrierfor shipping damage.We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.UnpackingAs an ENERGY STAR® Partner, Kenwood Corpora-tion has determined that this products meets theENERGY S TAR® guidelines for energy efficiency.This product can save energy. Saving energy reduces air pollution andlowers utility bills.AC110-120V~AC220-240V~For the United KingdomFactory fitted moulded mains plug1. The mains plug contains a fuse. For replacement, use only a 13-AmpASTA-approved (BS1362) fuse.2. The fuse cover must be refitted when replacing the fuse in themoulded plug.3. Do not cut off the mains plug from this equipment. If the plug fittedis not suitable for the power points in your home or the cable is tooshort to reach a power point, then obtain an appropriate safetyapproved extension lead or adapter, or consult your dealer.If nonetheless the mains plug is cut off, remove the fuse anddispose of the plug immediately, to avoid a possible shock hazard byinadvertent connection to the mains supply.IMPORTANTThe wires in the mains lead are coloured in accordance with thefollowing code:Blue : NeutralBrown : LiveDo not connect those leads to the earth terminal of a three-pin plug.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN