Kenwood M-909DV Instruction Manual

Also see for M-909DV: Instruction manual

Kenwood M-909DV Instruction Manual Manual pdf 17 page image

English | 17Listening to the radioOperation MAIN UNIT ON REMOTE1 Select FM/ AM : INPUTSELECTOR FM/AM2 Select the radiostation : 4 ¢ 4 ¢3 To select a ‘saved’station : – @ #Listening to the radio - more you can doLook for radio stations automaticallyPress [4 / ¢] on the front panel (or press [TUNING - /TUNING +] on the remote control) for more than 0.5 second.The tuner will scan automatically and stop when it finds a radiostation.Delete all the saved stationsPress and hold [P.MODE] for two seconds. “ERASE ALL” shows.Press [P.MODE] to erase all the saved stations.To ‘save’ a radio stationSelect a station you want by pressing [4 / ¢] on the frontpanel or [TUNING - /TUNING +] on the remote control. Press[P.MODE], the preset number flashes. Press [@ #] on theremote control to select the preset number you want. Press[P.MODE] to save it. Up to 50 radio stations can be saved.Improve poor FM receptionPress [7 (STOP)] on the remote control. This will change thetuner from stereo to mono and usually improve the reception.See information about your radio stationsThe FM tuner is supplied with the Radio Data System (RDS)facility. This shows the letters RDS on the display, plusinformation about the radio station being listened to. Press[RDS] on the remote control several times to view theinformation.PTY - Programme Type, such as News, Sport, Jazz.RT - Radio Text, the name of the radio station.CT - Time Control, the time at the location of the radio station.PS - Programme Service name, the name of channel.You can search the radio stations by programme type bypressing [RDS].The display will show the last PTY in use. Press [PTY] one ormore times to select your preferred programme type. Press[4 ¢]. The tuner will search automatically. When a stationis found the search will stop.Listening to cassette tapesOperation MAIN UNIT ON REMOTE1 Open the tape door : push open –2 Insert the tape : – –3 Close the tape door : – –4 Select the TAPEfunction :INPUTSELECTOR TAPE5 Start the tape playing : £ or £one more£ or £one more6 To stop a tape playing : 7 7Listen to cassette tapes - more you can doPlay Fast backward or ForwardAfter pressing [4] or [¢] ([1] or [¡] on the remotecontrol) during playback, or stop, press [£] again at a pointyou want.Auto Stop Deck :After playing one side of the tape, the unit stop automatically.Auto Reverse Deck :You can select direction of the cassette you want by pressing[ ] button repeatdly.Press [INPUT SELECTOR] to select Tape. You can set the tapeto play one side O , both sides O) , or both sides six times (O) ,by pressing one or more times.