Kenwood MDX-01 Instruction Manual

Also see for MDX-01: Service manual

Contents

Kenwood MDX-01 Instruction Manual Manual pdf 10 page image

10 EN4 Press the SET/DEMO key.5 Press the VOLUME/ MULTICONTROL UP ( ) or DOWN( ) key to input the figure ofminute.6 Press the SET/DEMO key.Main unit only1 Press the POWER key toturn power on.2 Press and hold the MENUkey for more than 3 seconds.3 Press the VOLUME/ MULTICONTROL UP ( ) or DOWN( ) key to input the figure ofhour.To check the time of day :Press the STOP 7 key (or the 7 STOP key onthe remote) while the unit is in the STANDBYmode.Adjusting thepresent timeTo use the timer function, it is required toset the built-in clock of the unit to the cor-rect time. The clock shows the time of dayin 12-hour system.÷ After a power failure or when the power cord isunplugged and plugged again, the time should beadjusted again.÷ Accurate time adjustment is possible by pressingthe SET/DEMO key at the same time as a timeannouncement indicating the 00 second of theminute.SOUNDPUSH OPENMD RECREPEATVOLUME/MULTI CONTROLTUNER FM/AMSTANDBY/TIMERMDTUNEMODESTOP/CDMENUPOWERSET/DEMOBEST HITSCD/MDHighSpeedDubbingSystemTUNING TUNINGSTOP63,, 152 4Example: Adjustment to 8:07am12 o'clock of day is displayed as "12:00pm" and 12o'clock of night is displayed as "12:00am".