Kenwood NEXEDGE NX-240 Instruction Manual

Also see for NEXEDGE NX-240: Instruction manual Function reference

Contents

9■ Key Lock with Status MemoryThis operates the same as Key Lock except that when thetransceiver power is turned OFF and then ON again, thekeys remains locked.■ Lone WorkerLone Worker Mode is a safety feature built into thetransceiver. If the transceiver is not operated for apre-programmed period of time, the transceiver will emit atone and automatically enter Emergency operation. Pressthis key to toggle the Lone Worker function ON or OFF.■ Low Transmit PowerEach channel is programmed with either high or lowtransmit power. On high transmit power channels, press thiskey to change the transmit power to low power (you cannotchange low transmit power channels to use high power).■ MonitorPress to deactivate signaling (QT/DQT, FleetSync signaling,NXDN, etc.). Press this key again to return to normaloperation.■ Monitor MomentaryContinuously hold down this key to deactivate signaling(QT/DQT, FleetSync signaling, NXDN, etc.). Release thiskey to return to normal operation.■ Paging CallPress to send a FleetSync or NXDN paging call to an IDfrom the ID list.■ Priority Zone-Channel SelectIf the scan priority type is “Operator Selectable”, pressthis key in normal mode to set the current channel as thePriority channel.■ ScanPress to start (or stop) scanning the transceiver channels.