Kenwood NEXEDGE NX-410 Instruction Manual

Also see for NEXEDGE NX-210: Function reference Instruction manual Specification Service manual Instruction manual

Contents

30• If there is memory available on your transceiver, “I am notavailable. Leave your Message.” will be sent to the callerand they can leave you a recorded message. When amessage is stored on your transceiver, “NEW MESSAGE”appears on the display.• If no memory is available on your transceiver, “I am notavailable” will be sent to the caller and “MEMORY FULL”appears on the display.■ PlaybackTo play back a recorded conversation, memo, or message:1 Press the key programmed as Playback or access theMenu {page 12}.• If the last action on your transceiver was to auto recordyour conversation, “STORE?” will appear on the display,otherwise a recording channel with the time of therecording will appear.2 Press / to select the channel you want to play.• “AR” represents auto recorded conversations, “RM”represents auto reply messages, and “VM” representsvoice memos.3 The transceiver will announce the time and channel,then the recording will play back.• When the entire recording has been played, “END OFMESSAGE” is displayed. You can also end the recordingat any time by pressing .• To delete the selected recording, press . To clear all therecorded data, press and hold .VOICE G UIDEWhen changing the zone and/or channel, an audio voice willannounce the new zone and channel. Additionally, whenchanging a function setting, the new setting will be announced.Note: Voice announcements vary by dealer setting.

/ 44

Related manuals for Kenwood NEXEDGE NX-210