Kenwood NEXEDGE NX-740H Instruction Manual

Also see for NX-740H: Function reference Instruction manual Service manual Service manual Instruction manual

Contents

6BASIC OPERATIONSSWITCHING POWER ON/ OFFPress to switch the transceiver ON.• A beep sounds and the display illuminates.• If the Transceiver Password function is programmed, “PS” will appear on the displaywhen the power is turned ON. Refer to “Transceiver Password”, below.Press again to switch the transceiver OFF.PROGRAMMABLE FUNCTIONSThe , , , , S, A, , C>, and keys can be programmed with the functionslisted below. Ask your dealer for details on these functions.• None• Autodial 1• AUX• Call 1/ Call 2• Channel Down• Channel Entry• Channel Up• CW Message 2• Direct Zone-Channel• Emergency 3• External Speaker• Horn Alert• LED Brightness• Lone Worker• Monitor• Monitor Momentary• Paging Call• Priority Zone-Channel Select• Squelch Off 1• Squelch Off Momentary 1• Operator Selectable Tone 1• Public Address• Scan• Scan Delete/Add• Scrambler/Encryption• Scrambler/Encryption Code• Send the GPS Data• Squelch Level 1• Talk Around• Volume Down• Volume Up• Zone Down• Zone Up1 Available only for Analog operation.2 Available only for NXDN operation.3 Emergency can be programmed only on the key.