Kenwood NEXEDGE NX-740H Instruction Manual

Also see for NX-740H: Function reference Instruction manual Service manual Service manual Instruction manual

Contents

11FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTIONFleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned byJVC KENWOOD Corporation.Note: If set up by your dealer, your transceiver may use the MDC-1200 feature in place ofFleetSync. MDC-1200 and FleetSync cannot be operated simultaneously.SELCALL (SELECTIVE CALLING)A Selcall is a voice call to a particular station or to a group of stations.■ Transmitting1 Select your desired zone and channel.2 Press the PTT switch to transmit your PTT ID list and begin your conversation.■ ReceivingIf enabled by your dealer, an alert tone will sound and the LED will blink whena Selcall has been received.To respond to the call, press the PTT switch and speak into the microphone.■ Identifi cation CodesAn ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.Each transceiver must have its own Fleet and ID number.Note: The ID range may be limited by programming.PAGING CALL1 Select your desired zone and channel.2 Press and hold the key programmed as [Paging Call] for 1 second to transmityour PTT ID list, to request a call.GPS REPORTIf a GPS unit (NMEA-0183 format) is installed on your transceiver, you can pressthe key programmed as [Send the GPS data] to send your location data.OPERATOR SELECTABLE TONE (OST)You can change the preset encode and decode tones for the selected channel.Up to 16 OST pairs can be pre-programmed by your dealer.1 Select your desired channel.2 Press the key programmed as [Operator Selectable Tone] or press and holdthe key.• “ot” appears on the display, followed by the current OST number.3 Press and C> to select the desired OST number.4 Use the transceiver the same as in a regular call; press the PTT switch totransmit and release it to receive.5 To exit OST mode and return to the preset encode and decode tones, press S.

/ 18

Related manuals for Kenwood NX-740H