Kenwood NEXEDGE NX-900 Instruction Manual

Also see for NEXEDGE NX-900: Function reference Instruction manual Service manual

20DTMF (DUAL TONE MULTI FREQUENCY) CALLSNote: DTMF calls can be made only in analog Operation.mAking A dTmF cAll■ Manual Dialing (Microphone Keypad Only)1 Press and hold the microphone PTT switch.2 Enter the desired digits using the microphone keypad.• The corresponding DTMF tones sound each time you press a key.• If you release the microphone PTT switch, transmit mode will end even if thecomplete number has not been sent.■ Keypad Auto PTT (Microphone Keypad Only)If your dealer has activated the Keypad Auto PTT function, simply press themicrophone keys to make the call.• The DTMF code will be sent automatically when you press a key.■ Store & Send1 Press the key programmed as Autodial.2 Enter the desired digits using the microphone keypad.• The digits appear on the display as you enter them.• Alternatively, you can enter digits by using the / keys {page 4}.• You can enter up to 30 digits before transmitting.3 After entering the complete number, press the microphone PTT switch orthe key to transmit.Note: If you switch the power OFF before transmitting the number, the number will be cleared.AuTodiAlAutodial allows you to quickly call DTMF numbers that have been programmedonto your transceiver.1 Press the key programmed as Autodial, or access the Autodial functionthrough the Menu {page 2}.• The first entry in the Autodial list appears on the display.2 Press the / keys or enter the appropriate DTMF number (0 ~ 32) to selectyour desired Autodial list number.• The stored entry appears on the display.3 Press the microphone PTT switch to make the call.STun codeThis function is used when a transceiver is stolen or lost. When the transceiverreceives a call containing a stun code, either transmit mode will be disabled,or both receive mode and transmit mode will be disabled. The stun code iscancelled when the transceiver receives a call with a revive code.