10Preparation sectionThe space between radio channels has been set to the onethat prevails in the area to which the system is shipped.However, if the current channel space setting does notmatch the setting in the area where the system is to be used,for instance when you move from area 1 or area 2 shown inthe following table or vice versa, proper reception of AM/FMbroadcasts cannot be expected. In this case, change thechannel space setting in accordance with your area by refer-ring to the following table.CHANNEL SPACE setting (Except for the U.S.A., Canada, U.K., Europe and Australia)CHANNELSPACE freq.Area12USA, Canada and SouthAmerican countriesOther countriesFM : 100 kHzAM : 10 kHzFM : 50 kHzAM : 9 kHzCURSORSETSTOP1Attach the remote controlunit to the main unit@2Switching the power ON3Select the TUNER input.4Press and hold the STOP ( 7)key for about 2 seconds.5Select the message to bedisplayed, "FM 100kHz" or"FM 50kHz".STANDBY/TIMERON/STANDBYCURSORSETTVVIDEO1VIDEO2CDTUNERTAPEFUNCTION7INPUT÷ The setting is remembered even when the power isswitched off.
