Kenwood NV-500 Instruction Manual

Contents

Kenwood NV-500 Instruction Manual Manual pdf 27 page image

27Basic sectionRECREC7TVVIDEO1VIDEO2CDTUNERTAPEFUNCTIONPause the recording (A.R.M.)÷ Press the ¶REC key during recording. It stops afterleaving a non-recorded blank of 4 seconds. (Press thekey again to resume recording.)Stop the recordingCD synchronized recordingWhen recording a CD, the playback of the sourceand recording of the cassette deck can be synchro-nized by putting the cassette deck in record-pausemode. (Sync recording)1 Put the CD recorder in pause mode.2 Select the music to be recorded by using theskip key (4 or ¢). (The tape pauses at thebeginning of the selected music.)3 Put the cassette deck in record-pause mode.4 Start playback of the CD. (Sync recordingstarts.)÷ Press the stop key (7) of the CD player to stoprecording.4. Set the recording condition.1 Perform steps 2 to 4 of "Selecting the reverse mode" on page 25.2 Perform steps 2 to 4 of "Selecting Dolby NR" on page 25.5. Start recording.Displayed when Dolby NR is selectedReverse mode indicatortape transportdirection indicator When the remote control unit isattached to the main unit:Tape counterWhen it is detached from the mainunit: "Stop" for stop,"Play" for playback,"Rec Pause" for record pause,"A.R.M." during A.R.M. op-eration.Recording indicator÷ Recording stops automatically when the tape side (s)to be recorded have been fully recorded.Let's recordingCheck that "Tape" is being displayed,then press the REC button.