Kenwood NX-1000 Series User Manual

Also see for NX-1000 Series: User manual User manual User guide User manual User manual

51Monitor [Analog/ NXDN/ DMR]Allows you to turn the transceiver signaling off, to listen to all calls that arereceived on the channel.PF Button:Press the programmed button to change the Monitor On or Off.Menu Mode:Select “MONITOR” and press the [ S ] button to change the Monitor On or Off.• The “ ” indicator appears while Monitor is On.Monitor Momentary [Analog/ NXDN/ DMR]PF Button:Press and hold the programmed button to momentarily turn the transceiversignaling off. Releasing this button turns the transceiver signaling back on. Whilesignaling is off, you can listen to all calls that are received on the channel.Operator Selectable Tone [Analog]Switches the preset QT/ DQT Decode/ Encode pair to an OST (OperatorSelectable Tone) pair.PF Button:Press the programmed button to change the OST On or Off.Menu Mode:Select “OST” and press the [ S ] button to change the OST On or Off.Refer to “Operator Selectable Tone (OST)” {page 77}.