Kenwood NX-1000 Series User Manual

Also see for NX-1000 Series: User manual User manual User guide User manual User manual

70FUNCTION DESCRIPTIONSFor details on functions that are not included in “FUNCTIONS OVERVIEW” {page26} and “FUNCTION DESCRIPTIONS”, please consult your dealer.TRANSCEIVER PASSWORDIf the transceiver is password protected, “PASSWORD” will appear on thedisplay when the power is turned on. To unlock the transceiver, enter the correctpassword.1 Press the button programmed as [Transceiver Password] to enter TransceiverPassword Mode.• Alternatively, press the button programmed as [Menu] to enter TransceiverPassword Mode using the Menu Mode.• If a password has been registered and the [Transceiver Password]function has not been programmed to a button or configured to the menu,the transceiver enters Transceiver Password Mode when the power isturned on.2 Enter a number using the [ and [ C> ] buttons.3 Press the [ S ] button to accept the number.4 Repeat steps 2 and 3 to enter the entire password.• Press the [ A ] button to delete an incorrectly entered number. Press andhold the [ A ] button to delete all numbers.5 Press the [ S ] button to confirm the entry.• If you enter an incorrect password, an error tone sounds and thetransceiver remains locked, the transceiver will return to "PASSWORD"display.• The password can contain a maximum of 6 digits.