NX-200-K, NX-200-K2, TK-5220-K, TK-5220-K2FCC ID: ALH378400IC: 282D-378400Installing the Cap over the Speaker/Microphone JacksIf you are not using an optional KMC-25 speaker/ microphone, install the cover over the univeral connector using thesupplied 4 x 6 mm screw.Installing the Optional Speaker/ Microphone1 Insert the guide of the speaker/ microphone connector into the groove of the universalconnector.2 Secure the connecter in place using the attached screw.

Kenwood NX-200-K Instruction Manual