Kenwood NX-800 Service Manual

Also see for NEXEDGE NX-800 series: Brochure Function reference Instruction manual Instruction manual Specifications

ItemCondition Measurement AdjustmentSpecifications/RemarksTest-equipment Unit Terminal PartsUnit MethodPC test modePanel tuning modeADJUSTMENTNX-8005612. Single ToneDeviation(2TONEdeviationadjust)adjust *4[Narrow][Wide]13. MSKDeviationadjust *4[Narrow][Wide]14. CWIDDeviationadjust *4[Very Narrow]1) Adj item:[An TONE]Adjust:[****]Deviation meterLPF : 15kHzHPF : OFFPTT : ONPress [ ] key to storethe adjustment value.1) Adj item:[Aw TONE]Adjust:[****]PTT : ONPress [ ] key to storethe adjustment value.1) Adj item:[An MSK]Adjust:[****]Deviation meterLPF : 15kHzHPF : OFFPTT : ONPress [ ] key to storethe adjustment value.1) Adj item:[Aw MSK]Adjust:[****]PTT : ONPress [ ] key to storethe adjustment value.1) Adj item:[Nv CWID]Adjust:[****]Deviation meterLPF : 3kHzHPF : OFFPTT : ONPress [ ] key to storethe adjustment value.1) Adj item:[Single ToneDeviation (Narrow)]Deviation meterLPF : 15kHzHPF : OFFPTT : Press [Transmit]button.Press [Apply] button tostore the adjustment value.1) Adj item:[Single ToneDeviation (Wide)]PTT : Press [Transmit]button.Press [Apply] button tostore the adjustment value.1) Adj item:[MSKDeviation (Narrow)]Deviation meterLPF : 15kHzHPF : OFFPTT : Press [Transmit]button.Press [Apply] button tostore the adjustment value.1) Adj item:[MSKDeviation (Wide)]PTT : Press [Transmit]button.Press [Apply] button tostore the adjustment value.1) Adj item:[CWIDDeviation]Deviation meterLPF : 3kHzHPF : OFFPTT : Press [Transmit]button.Press [Apply] button tostore the adjustment value.DeviationmeterOscilloscopeANT Write the value asfollowings.513 (Referencevalue)Write the value asfollowings.513 (Referencevalue)Write the value asfollowings.375 (Referencevalue)1.40~1.60kHz2.90~3.10kHz1.40~1.60kHz2.90~3.10kHz0.90~1.10kHz[Paneltuningmode][ ],[ ][PC testmode][ ],[ ]*4: Refer to the “Mode, Signaling, Necessary adjustment and order” table on page 57.